Introduction of
High Pressure Suspension Mill

Application of High Pressure Suspension Mill

High Pressure Suspension Mill is a new kind of mill, which is invented by our company chief engineer Mr Bai yinghui ,who is engaged in the grinding machine research and development experience in many years above the foundation,and according to the actural using situation of pulverizing equipment, In view of the development demend of pulverizing profession, a new patent product which is researched and developed voluntarily. Thus founded the highly effective, the low energy consumption epoch of the international industry pulverizing.
High Pressure Suspension Mill is mainly suitable in processing each kind of non-flammable explosive minerals material processing that below the mohs' scale 9.3 levels and the humidity below 6%.it has the widespread application in metallurgy, building materials, chemical industry, mine, highway construction, water conservation and electricity,it is the ideal choice for processing quartz, feldspar, calcite, limestone, talc, ceramics, marble, granite, dolomite, bauxite, iron ore, barite, bentonite, gangue, coal, the material end product finess may adjust between 0.613 millimeter to 0.033 millimeter.

Working principle of High Pressure Suspension Mill

In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure as high as1000-1500 kg equipped on the roller suspender. When High Pressure Suspension Mill works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and eccentricity. Its press is 1.2 times of Raymond mill under the same press condition, so the production is largely increased. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The air will be back to the blower for repetition of the above process. The left air wil come to thel bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring,, so to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness.

Specifications of High Pressure Suspension Mill

Notice: Any change of High Pressure Suspension Mill technical data shall not be advised additionally.